Preserve your cartridges
in 3 simple steps
Fast, accessible to anyone. Mastic, silicone or glue: the Masticbox SADURR® fits any of your opened cartridges in under 20 seconds.
Insert your cartridge and place the filter
This is the key step for preservation
Insert the cartridge
Place your opened cartridge of mastic, silicone or glue. Compatible with all standard nozzle cartridges.
Place the filter
Place the filter on top of the cartridge. Regenerable filter — zero obsolescence.
Screw on the valve cap
Screw on the valve cap and tighten it firmly.
Pump to create a vacuum
A few pumps are enough to vacuum-seal the cartridge.
Position the pump
Place the manual pump on the cap valve. The nozzle is designed for a perfect fit.
Pump 3 to 4 times
Press 3 to 4 times to expel the air and create a light vacuum inside the Masticbox SADURR®.
Screw on the safety cap
Secure everything with the airtight protective cap. Your cartridge is now preserved.
Quick check before storing
Tighten the valve cap firmly and make sure the seals are still in place inside the valve cap and the safety cap.
Reactivate the filter beads
The filter contains orange beads that absorb moisture. When they turn transparent, just reactivate them — no obsolescence, no replacement.
2 methods to choose from
In the oven
Place the filter upside down on the rack of a fan-assisted oven. The beads turn orange again within a few hours.
100°C max · A few hoursIn the microwave
Quicker. Place the filter upside down in the microwave. The beads are reactivated in 2 minutes maximum.
600W max · 2 minutesThe result in pictures
The beads are saturated with moisture. Place the filter upside down on the oven rack or in the microwave.
The beads turn orange again after the oven or microwave. The filter is fully regenerated.
Place the filter back the right way up on your cartridge. You're all set for new preservations.
Caution: let the filter cool to room temperature before handling. Do not exceed 100°C in the oven or 2 minutes in the microwave.
See SADURR® in action
Christelle, founder of SADURR®, walks you through the product in under a minute.
Ready to stop the waste?
Join the thousands of users who keep their cartridges fresh for months thanks to SADURR®.
How does it works ?
Simple use: 15 to 20 seconds
1. insert cartridge:
Unscrew
unscrew the valve cap and the waterproof protective cap, then insert your cartridge
Insert
Insert the filter onto your cartridge
screw
Screw the valve cap
2. Pump to remove the air:
Place
Place the hand pump on the valve
Pump
Pump 3-4 times
Screw
Screw on the waterproof protective cap
Preserve
Your cartridge is stored in less than 20 seconds in a hermetically sealed environment, ideal for its conservation and blocking all chemical fumes.
3. REACTIVATE THE FILTER Beads:
Reactivate
The filter contains orange beads, which when saturated with humidity, they need to be reactivated
Reactivate
Put the filter in the oven for 1 to 2 hours rotating heat max thermostat 100 degrees or in the microwave 2 minutes max 600W
Reactivate
Once orange, the beads are reactivated